XLED Home 2 White IP44 LED Flood Sensor Light

XLED Home 2 outdoor white finished IP44 LED sensor flood light.

This ultra-stylish fitting has a large rectangular light panel that can be swivelled 180° horizontally and vertically which makes it ideal for illuminating different areas in the garden, below the panel are the frame and wall bracket which are made from a durable UV-resistant plastic and have a 140-degree sensor at the base, this has a maximum detection range of 10 metres that is adjustable and the sensor can also be hand adjusted 180° horizontally and 90° vertically.

A class 2 double insulated fitting so no earth is required.

The light panel runs with a built-in 13.7-watt LED module with a colour temperature of 3000k warm white and a light output of 1550 lumen.

The time the light stays on after motion is detected can be set from 8 seconds to 35 minutes, and the lux (the ambient light level before the sensor starts working) can be set from 2-2000.

This model was previously a 4000k cool white LED but is now a 3000k warm white LED.

This is part of the Xled Home Flood Light Range.

Q1: Is the this light fitted with a motion sensor or is it light sensitive. I require light sensitive sensor for dusk to dawn

A1: It is a motion sensor

Q2: Can the lux be adjusted on the sensor in order to only pick up motion sensing at night ? Therefore not triggering in the daylight hours .
A2: Yes you can adjust the Lux setting, so it only works from dusk/night, until dawn.

Q3: Can this light be fitted so it can over-ride the sensor to have it manually turned on or off?
A3: Any sensor light can be manually turned off, as the switch stops any power getting to the sensor to begin with. It cant be manually turned on though, so I have put a link to lights with manual override below. Manual Override

Q4: How big is the backplate that attaches to the wall, I have a very narrow wall space for fixing thanks
A4: The width of the backplate is 90mm, the height is 55mm